| SS-5TZ02 (Medium-length Flat Metal Lever Micro Switch) | |
| 5A 125VAC / 3A 250VAC | |
| Three-pin type (COM common terminal + NO normally open + NC normally closed), one set of normally open and one set of normally closed contacts | |
| CCC, CE, ISO9001 | |
| >=1 million cycles | |
| Medium-length integrated flat metal lever triggering |
The SS-5TZ02 micro switch features a medium-length integrated flat metal lever. The moderately long lever structure balances installation space and effortless operation; a small amount of external force is required to drive the internal orange button to switch the contacts on and off. The product uses a black high-temperature resistant, flame-retardant engineering plastic shell, possessing excellent heat insulation, flame retardancy, and anti-aging properties, reliably isolating leakage risks and providing comprehensive protection for the internal contact components. The switch is equipped with COM, NO, and NC standard three-prong metal pin terminals. The direct-insertion pins facilitate PCB board soldering and circuit layout. Internally, it uses silver alloy contacts combined with a spring-driven quick-acting structure, ensuring instantaneous contact breaking, minimal arcing, and stable conductivity. The product features a built-in spring-loaded quick-acting mechanism with a medium-length swing arm that is highly sensitive to force, allowing for instantaneous switching of circuit on/off with a slight downward pressure. The operation is smooth and the limit feedback is precise. The flame-retardant PA material shell is suitable for various electrical environments, including household appliances and power supply equipment. The silver alloy contacts are oxidation-resistant and arc-resistant, maintaining stable contact resistance even after millions of repeated switching cycles. The universal three-prong terminal allows for flexible configuration with both normally open and normally closed wiring schemes, ensuring high product interchangeability. The compact body has pre-drilled mounting holes, allowing for screw-on or clip-on fixing in narrow equipment cavities. It is widely used in small household appliances, smart devices, and automated industrial control limit switching scenarios.
1. Protection of the Swing Arm
Do not bend or pull the metal swing arm forcefully to avoid deformation and internal travel misalignment. Trigger the swing arm by pressing it vertically and forward as much as possible. Do not pry from one side or strike the swing arm from the side.
2. Electrical Load Specifications
Strictly adhere to the rated power parameters. Do not exceed 5A 125VAC or 3A 250VAC loads to prevent overcurrent and contact burn-out. Distinguish between COM/NO/NC pins before wiring. Avoid excessively large solder joints connecting adjacent pins to prevent short circuits.
3. Installation Environment Requirements
Do not immerse the device in water, oil, or corrosive gases for extended periods. Keep away from high-temperature heat sources and acidic or alkaline liquids. Tighten the mounting screws with moderate force to prevent cracking of the plastic housing under pressure.
4. Assembly Stroke Control
Leave a reasonable pressure clearance during assembly. Do not allow the mechanical structure to completely jam the swing arm to avoid fatigue of the internal springs due to prolonged pressure, which can shorten the switch's lifespan. 5. Storage Requirements: Store products in a dry and ventilated environment to prevent pins from getting damp and oxidizing; protect idle products from dust to prevent dust from entering the switch and causing poor contact.









الوسم : 5tz02 (medium-length straight metal rocker arm micro switch)h, China, suppliers, manufacturers, customized, wholesale, cheap, discount, bulk, in stock, free sample